AquaParts SS2 Aquaponics Plumbing Kit

$249.95

Siphon-based, uses a Sump Tank

You don’t need to be a plumbing expert to get started in aquaponics!  We’ve assembled this aquaponics plumbing kit so you can easily connect two grow beds, a sump tank and a fish tank* to create an large aquaponics system!

(*The total combined water volume of the grow beds before media should be between one and three times the water volume of the fish tank)

Description

AquaParts SS2 Aquaponics Plumbing Kit


How AquaParts SS2 Aquaponics Plumbing Kit works:

With the addition of a sump tank, your fish tank water level will stay at a constant height AND you can expand beyond a 1 to 1 ratio of your fish tank volume to total grow bed volume…going all the way to 1 to 3!

Product Details:

  • SS2 = Siphon based drainage with a Sump Tank, 2-Beds

This kit has all the plumbing parts you need to build a thriving aquaponic system out of any two grow beds, a sump, and a fish tank.  That could be any of the following:

  • Two Bountiful Grow Beds, a sump tank and a 200 Gallon Fish Tank
  • Three IBC totes, with one cut in half for the grow beds, one cut in half for the sump tank, and the third serving as the fish tank.
  • Any other food-safe, watertight containers your DIY imagination can come up with!

What is included:

  • Step-by-step set of instructions to guide you.  This fully illustrated manual takes you through the entire project in detail, including how to size and select grow beds and tanks, how to assemble your system, how to start it, and how to maintain it for optimal performance.
  • Two bell siphons, complete with two Media Guards!
  • All the valves, bulkheads, t-connectors, and elbows you will need.
  • Pump is not included

We’ve done all the frustrating work so you don’t have to!

  • Sourced specialty plumbing parts you would normally need to purchase in bulk or have a wholesale license to purchase
  • Tracked down the best possible vendors
  • We’ve built and tested this kit in our own backyard!

Recommended Accessories

  1. Getting Started Combo Pack – gives you a test kit, pH Up and Down solutions for managing your pH, a cycling kit with the instructions and materials you need to establish your nitrifying bacteria colony, and the Aquaponics Explained DVD for even more information about aquaponics!  All at 20% less than if you had bought these items individually.
  2. Aeration – Your fish need more oxygen that this system design can give them, plus it is always good to have backup air in case your pump fails.

What this kit does not include

  • 1″ and 2″ PVC pipe – this can be easily and inexpensively sourced locally, and purchasing your own gives you more flexibility with the placement of your components. (As a guide, we used two 10’ lengths of 2” PVC as well as five 10’ lengths of 1” PVC in creating our test system using IBC totes.)
  • Pump – the best pump size for your unique system depends in part on the placement of your components. Please see our Pumps selection guide to purchase.
  • Grow Beds, Fish Tank and Sump Tank
  • Grow Media

Wholesale Minimum Quantity: 1

[local_1]

You may also like…

Go to Top