Commercial Active Aqua Air Pumps
How The Commercial Grade Active Aqua Air Pump Works:
A compact air pump solution to add more oxygen into your system water. Simple to install with low power consumption.
45L Air Pump has 6 outlet air distribution manifold
70L Air Pump has 8 outlet air distribution manifold
110L Air Pump has 12 outlet air distribution manifold
Connect Active Aqua Air Pump to stone or ceramic air diffusers using flexible, silicon tubing. The multiple port manifolds allow precise control of each air stone individually, so you only use what you need.
Secure the air pump outside the tank on a firm level surface above the water level. While running, the air pump’s vibration can cause it to fall off a shelf or other location. DO NOT place the aerator over any water.
The aerator needs to be placed above the water level to prevent water from siphoning back through the tubing and causing damage to the unit. The pump must also have access to fresh air since that same air will be distributed through the silicon airline tubing, through the air stones, and into the water.
Cut silicone airline tubing to the desired length, connect each section of tubing to the distribution manifold, and the other end to each air stone. Place air stones toward the bottom of the tank or reservoir.