The Most Powerful Aquaponics App
Start unlocking insights as soon as you log in. Develop your skills with the dedicated crop and disease libraries. Keep your fish alive with alerts and never miss a beat with the mobile app.
-
This 9ft long extension cable is a HYDROS Sense Accessory for the HYDROS Control monitors.
-
Detect two points of reference for accurate pH monitoring. Use calibration solutions that are on either spectrum of the pH you intend to monitor. For aquaponic tanks where the pH is normally 7.8-8.5, use calibration solutions 7.0 and 10.01. For aquaponic systems where the pH is normally below 7.0, use 4.01 and 7.01 calibration solutions. 4.01 pH - The lower threshold reading your pH monitor or controller will require for use with calcium reactors for saltwater aquariums, solutions below 7.00 pH, and also most aquaponic systems. 7.01 pH - Neutral pH calibration packet. This is used by almost all pH monitors and controllers for calibration. 10.01 pH - The higher threshold reading your pH monitor or controller will require for use with saltwater aquariums or solutions above 7.00 pH Calibration packets can be stored in a cool dry area for up to 1 year.
-
The Terminator must be installed as part of a collective on any open Command Bus ports. A terminator is needed to connect the units regardless of the command bus cable.
-
This 6ft HYDROS System Command Bus Cable allows HYDROS devices to power and communicate with other HYDROS devices. This is a DATA & POWER cable that CAN supply power from unit to unit.
-
Provides protection for your electrically powered items for your aquaponic system. This easy to use plug-in GFCI adapter fits any standard grounded outlet and provides instant GFCI protection. It immediately detects ground fault from damaged cords or exposure to water and shuts off power to avoid electrocution.
-
All-in-one maintenance kit provides everything you need to maintain, clean, and store your GroStar pH probe Kit Includes:
- 3M KCL storage solution (4oz.)
- Cleaning solution (8oz.)
- CalPod solution organizer
- Probe cleaning brush
- Wash bottle
-
The HYDROS WiFi Smart Plug is an outlet designed to work in tandem with any HYDROS controller (not included). Create rules and schedules to turn on and off different equipment such as a pump, light, heater, UV sterilizer, and whatever else you may want to control on-demand or put on a schedule. Program up to 8 WiFi plugs/power strips per Hydros controller. The Smart Plugs can monitor real-time electrical consumption and send alerts if a device draws power above or below a certain threshold.
-
The HYDROS Temperature Sensor has a long 79” cord that plugs into any Sense Port on the Control 2, Control 4, X3, and future HYDROS devices. This sensor must be plugged into a HYDROS Controller for this sort of automation to occur. HYDROS Controller NOT included.
-
The valve provides easy on/off water flow. The HYDROS DC Solenoid Valve is a Drive Port accessory for HYDROS Control 2 and Control 4.
-
Plug this extension cable into a preexisting rope leak sensor to extend the amount of space you can monitor. When a water leak is detected, you'll get a real-time alert to your mobile HYDROS app. The sensor also notifies your HYDROS X3 or X4 controller of the leak, triggering an alarm on the controller. HYDROS controller and sensor NOT included.
-
The HYDROS Pinpoint pH Probe is a Probe port accessory. Set target pH ranges for your system on the app and receive immediate mobile alerts when the pH rises or falls out of the safe range. The HYDROS Pinpoint pH Probe requires the HYDROS app and HYDROS Control unit-NOT included.
