We’ve made the framing system super easy to install. You can even move the frame around (before water is in) to get it positioned exactly where you want it. We have an installation video and manual to guide you through the process. All pipes are pre-cut and labeled so you know how to fit everything together. The metal fittings secure to the pipes with a simple hex key (supplied) or you can use a drill with a 5/16″ hex bit to make it go even faster. Should you be using insulation panels for the sidewalls you will need to cut those to fit between the pipes following the directions.
The Duraskrim liner installs over the framing system. Depending on the size of your trough it may be helpful to have some extra hands for the liner install so you can carefully guide and position the liner onto the frame. Once the liner is installed (following the supplied directions) you can insert the bulkhead fittings through the liner and endwall panel(s).
Depending on the size of the Growasis Plant System you purchased, you can have yours built and ready to fill with water in less than an hour. As always, we are here to help and want to make sure your installation goes smoothly. Please reach out to us if you have any questions.