Your Cart  |  Items: 0  |  Total: 0 View Cart

AquaHeat Natural Gas-Fired Heating System

AquaHeat Natural Gas-Fired Heating System

Highly efficient natural gas or propane powered heating for on-grid or off-grid use. See the description tab below for more information.

Prior to purchasing we ask that you please contact us so we can review your heating requirements and location to make sure you are getting the correct unit and options you need.  We will then provide a final quote for you.

 

$1,495.00

SKU: AHMAS002NG Categories: , ,

Description

Have you been searching for a way to keep your fish warm and happy without taxing your electricity? Are you looking for an aquaponic heating system with off-grid capabilities? AquaHeat is the latest in efficient gas-fired heating.
The AquaHeat heating system was designed with reliability and ease-of-use in mind. It has everything you need and nothing you don’t. AquaHeat comes
fully assembled, mounted, and tested — no more wasting your day away on or hiring an expensive plumber for “minimal” assembly.

  • runs on propane or natural gas
  • highly efficient 1.6 GPM heater (uses only 10 watts)
  • built-in automatic no-flow safety switch
  • rated at 40,900 BTU per hour / 12,000 watts
  • 25′ long corrugated stainless steel heat transfer coil
  • digital temperature controller with built-in submersible temperature probe
  • controller runs on a standard 120V outlet or 12V DC deep cycle marine battery
  • NO assembly required — arrives fully assembled, mounted, and tested
  • professionally soldered and tested
  • non-combustible metal framework
  • compact design makes efficient use of space and minimizes weak points in your connections

AquaHeat drawing

Optional

  • battery tender
  • solar PV panel (comes with 15 ft of wire. Additional wire is available in 5′ increments. Select from Solar Wire options above.)

Not Included

  • 2 standard D-cell batteries
  • 12V DC deep cycle marine battery
  • venting

NOT for heating potable water.

Estimating Your Propane or Natural Gas Usage

For those of you who would like to estimate your propane or natural gas usage, here are some handy formulas.

Step 1. Calculate your desired temperature increase. Temperatures are in degrees Fahrenheit.
Goal Temperature - Starting Temperature = Temperature Increase
e.g. 75 degrees - 60 degrees = 15 degrees

Step 2. Calculate the energy required to heat your fish tank to your goal temperature. Volume is in US gallons. Energy is in BTUs.
Temperature Increase x Fish Tank Volume x 8.34 = Required Energy
e.g. 15 degrees x 300 gallons x 8.34 = 37,530 BTU

Step 3. Calculate the volume of propane or natural gas required to heat your fish tank to your goal temperature.
(Propane BTU Conversion Factor: 91,333. Natural Gas BTU Conversion Factor: 85,250.)
Required Energy / BTU Conversion Factor = Required Fuel
e.g. 37,530 BTU / 91,333 = 0.41 gallons of propane required
e.g. 37,530 BTU / 85,250 = 0.44 gallons of natural gas required / 0.012 = 36.7 cubic feet of natural gas required

BTU Conversion Factors were sourced from the
US Energy Information Administration.
Volume Conversions were sourced from the State of Connecticut Department of Revenue Services.

Estimated High Range Limit: raises 2,500 gallons from 65 to 80 degrees Fahrenheit (25 degrees) in approximately 8 hours.

  • SHIPPING IS A FLAT RATE OF $225.00 WITHIN THE CONTINENTAL UNITED STATES AND WILL BE CALCULATED PER LENGTH IN YOUR CART. (HAWAII, ALASKA AND INTERNATIONAL ORDERS INCUR ADDITIONAL SHIPPING CHARGES, WE WILL CONTACT YOU WITH AMOUNT AND PAYMENT METHOD FOR THESE LOCATIONS.)

Additional information

Weight 0.001 lbs

Reviews

There are no reviews yet.

Be the first to review “AquaHeat Natural Gas-Fired Heating System”

Your email address will not be published.